13x13 white ceramic tile
There are three main types of floors (or subfloors) that you might encounter when starting on your ceramic tile installation: a. A concrete floor - Working ceramic tiles over a concrete subfloor is the most ideal but you have to check and clean it of debris before you start. All the cracks and holes need to be repaired and filled in before your ceramic tile installation can start. Once your start working on your project each of your ceramic individual tiles will be bonded directly to the concrete floor. If the cracks widen this will affect your tiles as well.
Be careful though with areas that will get much use such as around a fireplace where logs will be placed or fireplace tools will be used. Low fire tiles and glazes can crack or chip much more easily than stoneware and high fire glazes. Also if it is an area that will require frequent cleaning high relief may prove troublesome. For ceramic walls in dry areas not subject to much physical contact most any type of tile and glaze is adequate. For wet areas flat tiles low relief tiles or even high relief tiles can be used so long as they are not in a hazardous place that a body can inadvertently come into contact with them.
Most Popular This Week
Dust and other chemicals can make families sick and cleaning tile helps to remove at least some of the bacteria and disease from the home. If oil or any other petroleum product spills on the tile floor it should be cleaned up right away as the tiles can become very slippery and dangerous to walk on. Clean ceramic tile saves a family from accidents as long as it is dried adequately after Ceramic tile cleaners are designed specifically to clean ceramic tile especially the surface and are available in liquid form. Cleaner is also available as a disinfectants Care should be taken while cleaning tiles as chemicals no matter how harmless can be dangerous if used improperly.
Cost-effectiveness durability and versatility are their other advantages. Usually ceramic tiles can be installed on all types of countertops like those made of plywood cement and lightweight aggregates. But the main thing is the application of the right backing under the tiles. The selection of sink type is also important. Usually sinks selected for ceramic tile countertops are tile in and self rimming types. The tile in type sink is generally set below the tile surface and the other type is set on the top of the tile. Typically the size of ceramic tile countertop ranges from one square inch to six square inches.