ceramic floor tile removal machine
For removing these elements equipments such as sharp utility knife razor blade and grout saw with wooden or plastic handle can be used. Once the tiles are free of grout and caulk tapping can be done on the tiles to check whether any of the tiles is loose. If a loose tile is located then the rest of the tiles should come off easily. For removing the first tile gently apply a thin putty knife under the edge of the tile. To facilitate the insertion of knife under the tile a hammer can be used to tap the knifes handle. When the knife or blade is halfway beneath the tile it should be exerted gradually.
There are three main types of floors (or subfloors) that you might encounter when starting on your ceramic tile installation: a. A concrete floor - Working ceramic tiles over a concrete subfloor is the most ideal but you have to check and clean it of debris before you start. All the cracks and holes need to be repaired and filled in before your ceramic tile installation can start. Once your start working on your project each of your ceramic individual tiles will be bonded directly to the concrete floor. If the cracks widen this will affect your tiles as well.
Most Popular This Week
For plywood subfloors be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise your ceramic tiles will dislodge easily or worse break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it it must be cleaned thoroughly. For dust and other debris sweep and then mop your concrete subfloor surface and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.
Your plywood floor has to be at least 1 1/8 inch thick and supported by an equally strong underlayment beneath it. Ceramic tiles are heavy and would need a subfloor that can support their combined weight. And they will become dislodged or even break. Otherwise it would be unwise to do a ceramic tile installation on wood. c. An existing ceramic tile floor. Ceramic tile floors would more often than not require the new room occupant to remodel. There are two options for remodeling an existing tile floor: One leave the tile floor in place and work your ceramic tile installation directly over it; or two remove the old tiles.