ceramic tile wax
During installation tiles should be placed so that there are no gaps left between the individual tiles. Otherwise the tile can leak and seepage will occur in the spaces left behind. Seepage is a common problem in many households and the tiles are also harder to clean as dirt and dust will build up in the cracks and cannot be reached with a vacuum or sponge. Quickly clean ceramic tile will become a hopeless dream. Clean ceramic tile is also safer tile. Not only does cleaning help to extend the life and quality of tiles it can help to extend the life of the family.
There are three main types of floors (or subfloors) that you might encounter when starting on your ceramic tile installation: a. A concrete floor - Working ceramic tiles over a concrete subfloor is the most ideal but you have to check and clean it of debris before you start. All the cracks and holes need to be repaired and filled in before your ceramic tile installation can start. Once your start working on your project each of your ceramic individual tiles will be bonded directly to the concrete floor. If the cracks widen this will affect your tiles as well.
Most Popular This Week
An additional consideration with flooring tiles is slickness. A glossy glaze on a floor is not recommended. A heavily textured glaze or a matte glaze is best. Outdoor use in cold climates demands high fired tiles and dependable glazes especially if on horizontal surfaces. Low fire and even porous tiles can be used outdoors in cold climates if on or in a vertical surface. But you are still better off with a frost proof tile in cold climates. Finally there is the issue of a ceramic tile being food-safe. Many decorative ceramic art tiles are used as serving trays for a variety of hot and cold foods and it is important that these not leach out chemicals.
Be careful though with areas that will get much use such as around a fireplace where logs will be placed or fireplace tools will be used. Low fire tiles and glazes can crack or chip much more easily than stoneware and high fire glazes. Also if it is an area that will require frequent cleaning high relief may prove troublesome. For ceramic walls in dry areas not subject to much physical contact most any type of tile and glaze is adequate. For wet areas flat tiles low relief tiles or even high relief tiles can be used so long as they are not in a hazardous place that a body can inadvertently come into contact with them.