dry cutting ceramic tile
Your plywood floor has to be at least 1 1/8 inch thick and supported by an equally strong underlayment beneath it. Ceramic tiles are heavy and would need a subfloor that can support their combined weight. And they will become dislodged or even break. Otherwise it would be unwise to do a ceramic tile installation on wood. c. An existing ceramic tile floor. Ceramic tile floors would more often than not require the new room occupant to remodel. There are two options for remodeling an existing tile floor: One leave the tile floor in place and work your ceramic tile installation directly over it; or two remove the old tiles.
Dust and other chemicals can make families sick and cleaning tile helps to remove at least some of the bacteria and disease from the home. If oil or any other petroleum product spills on the tile floor it should be cleaned up right away as the tiles can become very slippery and dangerous to walk on. Clean ceramic tile saves a family from accidents as long as it is dried adequately after Ceramic tile cleaners are designed specifically to clean ceramic tile especially the surface and are available in liquid form. Cleaner is also available as a disinfectants Care should be taken while cleaning tiles as chemicals no matter how harmless can be dangerous if used improperly.
Most Popular This Week
The kind of ceramic floor tiles you are looking for should have three main qualities: The ability to withstand water absorption impressive resistance to abrasion and constant use as well as high aesthetic qualities. Most hardware stores are open to requests for information like details tile strength and ability to withstand regular use and scratching and resistance to physical stress and liquids. Gaining information will help you a lot in your ceramic tile installation and maintenance. When hesitating between two options it never hurts to seek assistance from your tile dealer or someone who knows tiles better than you.
Be careful though with areas that will get much use such as around a fireplace where logs will be placed or fireplace tools will be used. Low fire tiles and glazes can crack or chip much more easily than stoneware and high fire glazes. Also if it is an area that will require frequent cleaning high relief may prove troublesome. For ceramic walls in dry areas not subject to much physical contact most any type of tile and glaze is adequate. For wet areas flat tiles low relief tiles or even high relief tiles can be used so long as they are not in a hazardous place that a body can inadvertently come into contact with them.